StrataFrame Forum » StrataFrame Application Framework - V1 » WinForms (How do I?) » Click-Once Publishing "Stuck"

RE: Click-Once Publishing "Stuck"

Larry Caylor — Wed, 12 Mar 2014 14:55:30 GMT

I’m with Edhy. I never could get Click Once to work reliably, I switched to AppLife Update and deployments became a non-issue.
It’s very flexible, always works, and the support is terrific.

-Larry

Click-Once Publishing "Stuck"

Bill Cunnien — Wed, 12 Mar 2014 14:55:30 GMT

I publish my updates to a network location. Actually, there are two locations. The first location, which is on my local subnet, has no problems. The second, remote location does get the app published and everyone can install it and use it; however, my Visual Studio remains in a "Publishing..." state. The browser page stating the publication has been successful does show up. All of the necessary files are on the network share. VS2008 just doesn't want to finish the job. Has anyone run into this? Any VS2008 clean-up tricks I should employ?

Thanks!
Bill

RE: Click-Once Publishing "Stuck"

Edhy Rijo — Thu, 27 Feb 2014 12:27:30 GMT

Hi Ross,

I use AppLifeUpdate from kineticjump, excellent tool, great support and better yet, it does work all the time.

RE: Click-Once Publishing "Stuck"

Ross L Rooker, Sr.(1) — Thu, 27 Feb 2014 11:36:25 GMT

What do you use to allow users to update their desktop app rather than "click once"?

RE: Click-Once Publishing "Stuck"

Greg McGuffey — Tue, 01 Sep 2009 15:41:38 GMT

Bill,

I never use remote publishing. I.e. I publish local and then copy files myself (though that could be automated). You just have to differentiate between were the files will be copied and the URL that is used for installation and/or updates.

Oh..."I'm an IDE user too" :blush:

RE: Click-Once Publishing "Stuck"

Trent L. Taylor — Tue, 01 Sep 2009 10:12:35 GMT

Let me just say this one thing....I am glad we moved away from Click-Once Deployment! :D

I have nothing to offer since I was never a fan of this logic and it was not sophisticated enough for our medical application. I know that once you get it working it can be nice...but the larger an application becomes, the more of this I always see until eventually a move is made.

Good luck, I hope that you come up with a solution soon! ;)

RE: Click-Once Publishing "Stuck"

Bill Cunnien — Tue, 01 Sep 2009 08:28:18 GMT

It is happening again. The remote subnet gets the update but the IDE does not stop the publishing process. Just fyi.

:doze:

RE: Click-Once Publishing "Stuck"

Keith Chisarik — Mon, 31 Aug 2009 19:14:21 GMT

Bill,

Good sharing.

<<stands up>> I use the IDE too.

Glad you got it going.

Keith

RE: Click-Once Publishing "Stuck"

Bill Cunnien — Mon, 31 Aug 2009 17:48:40 GMT

"Hi. My name is Bill. I am a Visual Studio user."

When I closed the IDE this last time, a documentation update fired. I have no idea why there is suddenly a documentation update. I have not installed something new in quite a while. There have been many builds and exits since the last updates. This took quite a few minutes (as always). After that, I decided to fire up the IDE and publish locally. There were no issue. Then, I pushed the application out to the remote subnet...

There were no issues. It worked.

:pinch:

Go figure.

I guess the real problem might be the fact that in spite of these unusual, unsolveable problems, I am still using the IDE.

I am addicted.

RE: Click-Once Publishing "Stuck"

Bill Cunnien — Mon, 31 Aug 2009 16:30:57 GMT

I spent extra time clearing out ALL warnings in my build. There were about 26 that have been hanging around for a while...mostly just clean up related items. Even with them out of the picture, I still am having trouble. Now, though, it is worse. I published the app to my local subnet. It is stalling at the same point as the publication to the remote subnet. This time, though, there is no auto-generated web page, so I doubt it actually finished. The status is 'Ready' and the Output windows says:

[codesnippet]========== Build: 11 succeeded or up-to-date, 0 failed, 0 skipped ==========[/codesnippet]

That's it. The rest of the application properties window is disabled. I am stuck.

Canceling the publication and build. Time to remove temp files and such and try again.

RE: Click-Once Publishing "Stuck"

Bill Cunnien — Mon, 31 Aug 2009 15:41:55 GMT

Ok...after managing several necessary updates for our clients, I was able to get back to a point where I can publish the application, again. The local subnet went off without a hitch. The remote subnet is publishing now. It usually takes about 10 minutes.

(time passes)

The build is stuck. Same output:

[codesnippet]========== Build: 11 succeeded or up-to-date, 0 failed, 0 skipped ==========
Building Aspire.SF...
Connecting to '\\Spmonroe\Monroe\Deployment\AspireSF\'...
Publishing files...[/codesnippet]

Bummer. The interesting thing is that the remote location has all of the files that it needs to update the app. It works fine on their end. The publishing process just doesn't want to let go.

Well, I will look further and see what I can come up with. This seems to be another one of those annoying Visual Studio things.

RE: Click-Once Publishing "Stuck"

Bill Cunnien — Mon, 31 Aug 2009 13:33:24 GMT

Greg, the file (and all the others with errors) are all included. This little publishing routine has worked up until late last week.

While testing some changes to my application in order to resolve potential hangups in the publishing of the app, I ran into this really neat error when closing the app:

[codesnippet]DisconnectedContext was detected
Message: Context 0x34c17a0' is disconnected. Releasing the interfaces from the current context (context 0x34c1630).This may cause corruption or data loss. To avoid this problem, please ensure that all contexts/apartments stay alive until the applicationis completely done with the RuntimeCallableWrappers that represent COM components that liveinside them.
[/codesnippet]

Can you say, "gobbledygook"?

As soon as I get past this error, I will try another publication to the remote server. Hope to have some results to release soon.

RE: Click-Once Publishing "Stuck"

Greg McGuffey — Mon, 31 Aug 2009 10:32:55 GMT

Is that file added to the list of published files?

RE: Click-Once Publishing "Stuck"

Bill Cunnien — Mon, 31 Aug 2009 09:01:30 GMT

Restarting the IDE did not work. :crying: I have to step out for a bit. I'll get back to this around lunch time.

RE: Click-Once Publishing "Stuck"

Bill Cunnien — Mon, 31 Aug 2009 08:44:23 GMT

I just ran a "Rebuild All" on my solution and on the first project, I got the following error:

[codesnippet]error CS0006: Metadata file 'C:\Aspire Projects\AspireSF\AspireModel\bin\Debug\AspireModel.dll' could not be found[/codesnippet]

Each project generated a similar error. I'll close VS2008 and try again.

RE: Click-Once Publishing "Stuck"

Bill Cunnien — Mon, 31 Aug 2009 08:25:29 GMT

Thanks, Keith,

This is all I am getting from the Output window:

[codesnippet]========== Build: 11 succeeded or up-to-date, 0 failed, 0 skipped ==========
Building Aspire.SF...
Connecting to '\\Spmonroe\Monroe\Deployment\AspireSF\'...
Publishing files...
[/codesnippet]

I left this run overnight once last week, but it never finished. It is still running at the moment. I've been searching in hopes of stumbling across something before I cancel my build, again.

RE: Click-Once Publishing "Stuck"

Keith Chisarik — Mon, 31 Aug 2009 08:08:00 GMT

I had this problem and beat my head on it for a while, what helped me was to open the Output Window during the publish, VS had put errors there that would not otherwise have been displayed. Once I found that I was able to troubleshoot. Hope it helps.