StrataFrame Forum » StrataFrame Application Framework - V1 » Issues » 2021 New computer and need to install v1

2021 New computer and need to install v1

Andrew Harper — Thu, 19 Aug 2021 08:21:22 GMT

Hi All,

I am hoping that someone can provide detailed instructions for installing v1 on a Windows 10 computer running VS2019. I have the original install files and if I recall correctly there was a custom VSIX and some customised routines developed by Edhy. The link to these no longer works.

Trust everyone is well and I look forward to hearing about the V2 developments.

TIA,

Andy

RE: 2021 New computer and need to install v1

Edhy Rijo — Thu, 19 Aug 2021 08:21:22 GMT

+x[quote]

[b]Andrew Harper - 8/19/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/16/2021[/b]
+x[quote]

[b]Andrew Harper - 8/16/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/15/2021[/b]
+x[quote]

[b]Andrew Harper - 8/15/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/15/2021[/b]
+x[quote]

[b]Andrew Harper - 8/15/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/12/2021[/b]
+x[quote]

[b]Andrew Harper - 8/11/2021[/b]
Just bumping this message in the hope someone can help with missing pre-requisites.

Tia, Andy
[/quote]

Hi Andrew,
Sorry for the delay getting back to you.
I am trying to upload my full custom setup which may have the prerequisites you may be missing.
Please try my setup first and then try installing the extension.

I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip
[/quote]

Hi Edhy,
Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip.
When I run the exe I get the following display

I suspect that this may be an older version of your installer.
Best regards, Andy

[/quote]

Hi Andrew,

Please try this one:
http://www.progytech.com/downloads/StrataFrameSetup_v1.7.7.1.zip
[/quote]
Thanks Edhy - your installer completed successfully.

I then double clicked on the VSIX file and got the same message as previously about missing prerequisites.
Is there a step I am missing between running your installer and clicking in the VSIX?
Do I need to activate Strataframe on the new computer prior to running the VSIX?

TIA, Andy

[/quote]
Andrew,
I believe you are missing the MS SQL SMO libraries used by the DDT.
Go to this link:
https://www.microsoft.com/en-us/download/details.aspx?id=54279
Then look and download the following files:
ENU\x64\SharedManagementObjects.msi
ENU\x86\SharedManagementObjects.msi
ENU\x64\SQLSysClrTypes.msi
ENU\x86\SQLSysClrTypes.msi

You may only need to install the x64 versions first then try to run the VSIX.
[/quote]

Hi Edhy,

1. I downloaded and installed the X64 versions and then reran the VSIX - same result, missing prerequisites.
2. I downloaded and installed the X86 versions and then reran the VSIX - same result, missing prerequisites.
3. I re-read forum message Topic33467 and installed the Addins and Extensibility DLLs into the GAC by running the 2019 Visual Studio command prompt as an administrator. Both DLLs were successfully added to the cache.
4. I reran the VSIX - same result, missing prerequisites.

Andy

[/quote]
Hi Andrew,

I believe you don't have my latest VSIX file.
Please download it from this link below, unzip it and follow the instructions in the ReadMe.txt file but use the Developer Command Prompt for VS 2019 instead..

http://www.progytech.com/downloads/SFv1_MicroFour_StrataFrame_Package_%206-20-2018.zip

[/quote]

THANKS EDHY ! ! !

The download from the link you provided installed both VS2017 and VS2019. Haven't been able to test thoroughly as yet but looking good so far.

Your help is much appreciated,

Andy

[/quote]

Hi Andy,
Wow, I am super happy that this one worked for you. There must have been an issue with the first VSIX you got.
Since the forum was migrated I kind of lost track of what I've posted.

RE: 2021 New computer and need to install v1

Andrew Harper — Thu, 19 Aug 2021 02:32:39 GMT

+x[quote]

[b]Edhy Rijo - 8/16/2021[/b]
+x[quote]

[b]Andrew Harper - 8/16/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/15/2021[/b]
+x[quote]

[b]Andrew Harper - 8/15/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/15/2021[/b]
+x[quote]

[b]Andrew Harper - 8/15/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/12/2021[/b]
+x[quote]

[b]Andrew Harper - 8/11/2021[/b]
Just bumping this message in the hope someone can help with missing pre-requisites.

Tia, Andy
[/quote]

Hi Andrew,
Sorry for the delay getting back to you.
I am trying to upload my full custom setup which may have the prerequisites you may be missing.
Please try my setup first and then try installing the extension.

I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip
[/quote]

Hi Edhy,
Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip.
When I run the exe I get the following display

I suspect that this may be an older version of your installer.
Best regards, Andy

[/quote]

Hi Andrew,

Please try this one:
http://www.progytech.com/downloads/StrataFrameSetup_v1.7.7.1.zip
[/quote]
Thanks Edhy - your installer completed successfully.

I then double clicked on the VSIX file and got the same message as previously about missing prerequisites.
Is there a step I am missing between running your installer and clicking in the VSIX?
Do I need to activate Strataframe on the new computer prior to running the VSIX?

TIA, Andy

[/quote]
Andrew,
I believe you are missing the MS SQL SMO libraries used by the DDT.
Go to this link:
https://www.microsoft.com/en-us/download/details.aspx?id=54279
Then look and download the following files:
ENU\x64\SharedManagementObjects.msi
ENU\x86\SharedManagementObjects.msi
ENU\x64\SQLSysClrTypes.msi
ENU\x86\SQLSysClrTypes.msi

You may only need to install the x64 versions first then try to run the VSIX.
[/quote]

Hi Edhy,

1. I downloaded and installed the X64 versions and then reran the VSIX - same result, missing prerequisites.
2. I downloaded and installed the X86 versions and then reran the VSIX - same result, missing prerequisites.
3. I re-read forum message Topic33467 and installed the Addins and Extensibility DLLs into the GAC by running the 2019 Visual Studio command prompt as an administrator. Both DLLs were successfully added to the cache.
4. I reran the VSIX - same result, missing prerequisites.

Andy

[/quote]
Hi Andrew,

I believe you don't have my latest VSIX file.
Please download it from this link below, unzip it and follow the instructions in the ReadMe.txt file but use the Developer Command Prompt for VS 2019 instead..

http://www.progytech.com/downloads/SFv1_MicroFour_StrataFrame_Package_%206-20-2018.zip

[/quote]

THANKS EDHY ! ! !

The download from the link you provided installed both VS2017 and VS2019. Haven't been able to test thoroughly as yet but looking good so far.

Your help is much appreciated,

Andy

RE: 2021 New computer and need to install v1

Edhy Rijo — Mon, 16 Aug 2021 06:42:45 GMT

+x[quote]

[b]Andrew Harper - 8/16/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/15/2021[/b]
+x[quote]

[b]Andrew Harper - 8/15/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/15/2021[/b]
+x[quote]

[b]Andrew Harper - 8/15/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/12/2021[/b]
+x[quote]

[b]Andrew Harper - 8/11/2021[/b]
Just bumping this message in the hope someone can help with missing pre-requisites.

Tia, Andy
[/quote]

Hi Andrew,
Sorry for the delay getting back to you.
I am trying to upload my full custom setup which may have the prerequisites you may be missing.
Please try my setup first and then try installing the extension.

I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip
[/quote]

Hi Edhy,
Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip.
When I run the exe I get the following display

I suspect that this may be an older version of your installer.
Best regards, Andy

[/quote]

Hi Andrew,

Please try this one:
http://www.progytech.com/downloads/StrataFrameSetup_v1.7.7.1.zip
[/quote]
Thanks Edhy - your installer completed successfully.

I then double clicked on the VSIX file and got the same message as previously about missing prerequisites.
Is there a step I am missing between running your installer and clicking in the VSIX?
Do I need to activate Strataframe on the new computer prior to running the VSIX?

TIA, Andy

[/quote]
Andrew,
I believe you are missing the MS SQL SMO libraries used by the DDT.
Go to this link:
https://www.microsoft.com/en-us/download/details.aspx?id=54279
Then look and download the following files:
ENU\x64\SharedManagementObjects.msi
ENU\x86\SharedManagementObjects.msi
ENU\x64\SQLSysClrTypes.msi
ENU\x86\SQLSysClrTypes.msi

You may only need to install the x64 versions first then try to run the VSIX.
[/quote]

Hi Edhy,

1. I downloaded and installed the X64 versions and then reran the VSIX - same result, missing prerequisites.
2. I downloaded and installed the X86 versions and then reran the VSIX - same result, missing prerequisites.
3. I re-read forum message Topic33467 and installed the Addins and Extensibility DLLs into the GAC by running the 2019 Visual Studio command prompt as an administrator. Both DLLs were successfully added to the cache.
4. I reran the VSIX - same result, missing prerequisites.

Andy

[/quote]

Hi Andrew,

I believe you don't have my latest VSIX file.
Please download it from this link below, unzip it and follow the instructions in the ReadMe.txt file but use the Developer Command Prompt for VS 2019 instead..

http://www.progytech.com/downloads/SFv1_MicroFour_StrataFrame_Package_%206-20-2018.zip

RE: 2021 New computer and need to install v1

Andrew Harper — Mon, 16 Aug 2021 00:10:40 GMT

+x[quote]

[b]Edhy Rijo - 8/15/2021[/b]
+x[quote]

[b]Andrew Harper - 8/15/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/15/2021[/b]
+x[quote]

[b]Andrew Harper - 8/15/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/12/2021[/b]
+x[quote]

[b]Andrew Harper - 8/11/2021[/b]
Just bumping this message in the hope someone can help with missing pre-requisites.

Tia, Andy
[/quote]

Hi Andrew,
Sorry for the delay getting back to you.
I am trying to upload my full custom setup which may have the prerequisites you may be missing.
Please try my setup first and then try installing the extension.

I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip
[/quote]

Hi Edhy,
Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip.
When I run the exe I get the following display

I suspect that this may be an older version of your installer.
Best regards, Andy

[/quote]

Hi Andrew,

Please try this one:
http://www.progytech.com/downloads/StrataFrameSetup_v1.7.7.1.zip
[/quote]
Thanks Edhy - your installer completed successfully.

I then double clicked on the VSIX file and got the same message as previously about missing prerequisites.
Is there a step I am missing between running your installer and clicking in the VSIX?
Do I need to activate Strataframe on the new computer prior to running the VSIX?

TIA, Andy

[/quote]
Andrew,
I believe you are missing the MS SQL SMO libraries used by the DDT.
Go to this link:
https://www.microsoft.com/en-us/download/details.aspx?id=54279
Then look and download the following files:
ENU\x64\SharedManagementObjects.msi
ENU\x86\SharedManagementObjects.msi
ENU\x64\SQLSysClrTypes.msi
ENU\x86\SQLSysClrTypes.msi

You may only need to install the x64 versions first then try to run the VSIX.
[/quote]

Hi Edhy,

1. I downloaded and installed the X64 versions and then reran the VSIX - same result, missing prerequisites.
2. I downloaded and installed the X86 versions and then reran the VSIX - same result, missing prerequisites.
3. I re-read forum message Topic33467 and installed the Addins and Extensibility DLLs into the GAC by running the 2019 Visual Studio command prompt as an administrator. Both DLLs were successfully added to the cache.
4. I reran the VSIX - same result, missing prerequisites.

Andy

RE: 2021 New computer and need to install v1

Edhy Rijo — Sun, 15 Aug 2021 23:18:22 GMT

+x[quote]

[b]Andrew Harper - 8/15/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/15/2021[/b]
+x[quote]

[b]Andrew Harper - 8/15/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/12/2021[/b]
+x[quote]

[b]Andrew Harper - 8/11/2021[/b]
Just bumping this message in the hope someone can help with missing pre-requisites.

Tia, Andy
[/quote]

Hi Andrew,
Sorry for the delay getting back to you.
I am trying to upload my full custom setup which may have the prerequisites you may be missing.
Please try my setup first and then try installing the extension.

I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip
[/quote]

Hi Edhy,
Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip.
When I run the exe I get the following display

I suspect that this may be an older version of your installer.
Best regards, Andy

[/quote]

Hi Andrew,

Please try this one:
http://www.progytech.com/downloads/StrataFrameSetup_v1.7.7.1.zip
[/quote]
Thanks Edhy - your installer completed successfully.

I then double clicked on the VSIX file and got the same message as previously about missing prerequisites.
Is there a step I am missing between running your installer and clicking in the VSIX?
Do I need to activate Strataframe on the new computer prior to running the VSIX?

TIA, Andy

[/quote]

Andrew,
I believe you are missing the MS SQL SMO libraries used by the DDT.
Go to this link:
https://www.microsoft.com/en-us/download/details.aspx?id=54279
Then look and download the following files:
ENU\x64\SharedManagementObjects.msi
ENU\x86\SharedManagementObjects.msi
ENU\x64\SQLSysClrTypes.msi
ENU\x86\SQLSysClrTypes.msi

You may only need to install the x64 versions first then try to run the VSIX.

RE: 2021 New computer and need to install v1

Andrew Harper — Sun, 15 Aug 2021 23:02:07 GMT

+x[quote]

[b]Edhy Rijo - 8/15/2021[/b]
+x[quote]

[b]Andrew Harper - 8/15/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/12/2021[/b]
+x[quote]

[b]Andrew Harper - 8/11/2021[/b]
Just bumping this message in the hope someone can help with missing pre-requisites.

Tia, Andy
[/quote]

Hi Andrew,
Sorry for the delay getting back to you.
I am trying to upload my full custom setup which may have the prerequisites you may be missing.
Please try my setup first and then try installing the extension.

I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip
[/quote]

Hi Edhy,
Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip.
When I run the exe I get the following display

I suspect that this may be an older version of your installer.
Best regards, Andy

[/quote]

Hi Andrew,

Please try this one:
http://www.progytech.com/downloads/StrataFrameSetup_v1.7.7.1.zip
[/quote]

Thanks Edhy - your installer completed successfully.

I then double clicked on the VSIX file and got the same message as previously about missing prerequisites.
Is there a step I am missing between running your installer and clicking in the VSIX?
Do I need to activate Strataframe on the new computer prior to running the VSIX?

TIA, Andy

RE: 2021 New computer and need to install v1

Edhy Rijo — Sun, 15 Aug 2021 21:59:00 GMT

+x[quote]

[b]Andrew Harper - 8/15/2021[/b]
+x[quote]

[b]Edhy Rijo - 8/12/2021[/b]
+x[quote]

[b]Andrew Harper - 8/11/2021[/b]
Just bumping this message in the hope someone can help with missing pre-requisites.

Tia, Andy
[/quote]

Hi Andrew,
Sorry for the delay getting back to you.
I am trying to upload my full custom setup which may have the prerequisites you may be missing.
Please try my setup first and then try installing the extension.

I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip
[/quote]

Hi Edhy,
Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip.
When I run the exe I get the following display

I suspect that this may be an older version of your installer.
Best regards, Andy

[/quote]

Hi Andrew,

Please try this one:
http://www.progytech.com/downloads/StrataFrameSetup_v1.7.7.1.zip

RE: 2021 New computer and need to install v1

Andrew Harper — Sun, 15 Aug 2021 20:15:45 GMT

+x[quote]

[b]Edhy Rijo - 8/12/2021[/b]
+x[quote]

[b]Andrew Harper - 8/11/2021[/b]
Just bumping this message in the hope someone can help with missing pre-requisites.

Tia, Andy
[/quote]

Hi Andrew,
Sorry for the delay getting back to you.
I am trying to upload my full custom setup which may have the prerequisites you may be missing.
Please try my setup first and then try installing the extension.

I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip
[/quote]

Hi Edhy,
Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip.
When I run the exe I get the following display

I suspect that this may be an older version of your installer.
Best regards, Andy

RE: 2021 New computer and need to install v1

Edhy Rijo — Thu, 12 Aug 2021 08:09:58 GMT

+x[quote]

[b]Andrew Harper - 8/11/2021[/b]
Just bumping this message in the hope someone can help with missing pre-requisites.

Tia, Andy
[/quote]

Hi Andrew,
Sorry for the delay getting back to you.
I am trying to upload my full custom setup which may have the prerequisites you may be missing.
Please try my setup first and then try installing the extension.

I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip

RE: 2021 New computer and need to install v1

Andrew Harper — Wed, 11 Aug 2021 01:25:03 GMT

Just bumping this message in the hope someone can help with missing pre-requisites.

Tia, Andy

RE: 2021 New computer and need to install v1

Andrew Harper — Wed, 04 Aug 2021 22:13:02 GMT

Just wondering if anyone had thoughts about the missing pre-requisites?

I have .net 3.5 and 4.8 installed my W10 notebook as shown below
On my old w7 notebook that I am retiring only .NET 3.5.1 is installed and all is working well with VS2017 community edition and Stataframe.
TIA, Andy

POST REPLY

Group: StrataFrame Users
Posts: 81, Visits: 3.1K
Last active: 5 seconds ago

RE: 2021 New computer and need to install v1

Andrew Harper — Tue, 03 Aug 2021 04:47:48 GMT

+x[quote]

[b]Edhy Rijo - 8/2/2021[/b]
+x[quote]

[b]Andrew Harper - 8/2/2021[/b]
Update:

I successfully downloaded and installed Edhy's installer and Strataframe v1.7.7.1 options now show on my Windows10 20H2 (OS Build 19042.1110) start menu.
As the 2017 VSIX will not install with VS2019 I downloaded and installed VS 2017 Community Edition and installed that successfully.
I rebooted the computer.
I then double clicked on the 2017 VSIX "MicroFour StrataFrame Package.vsix"
The installer runs and then stops as per screenshot below

Any thoughts or suggestions appreciated.

TIA, Andy
[/quote]

Hi Andrew,
With the forum merge I believe that previous messages may not be available yet.
Attached is a zip file with the VSIX I modified so it can be use with VS2019. Please read the ReadMe.txt file and follow the instructions and it should work for you.

Please let me know how it goes.

[/quote]

Hi Edhy,

Thanks again for your for your help.
I downloaded the zip file but it didn't contain a readme.txt file. I extracted the files to c:\temp and then double clicked on the VSIX file with the result as shown below

TIA, Andy

RE: 2021 New computer and need to install v1

Edhy Rijo — Mon, 02 Aug 2021 05:56:37 GMT

+x[quote]

[b]Andrew Harper - 8/2/2021[/b]
Update:

I successfully downloaded and installed Edhy's installer and Strataframe v1.7.7.1 options now show on my Windows10 20H2 (OS Build 19042.1110) start menu.
As the 2017 VSIX will not install with VS2019 I downloaded and installed VS 2017 Community Edition and installed that successfully.
I rebooted the computer.
I then double clicked on the 2017 VSIX "MicroFour StrataFrame Package.vsix"
The installer runs and then stops as per screenshot below

Any thoughts or suggestions appreciated.

TIA, Andy
[/quote]

Hi Andrew,
With the forum merge I believe that previous messages may not be available yet.
Attached is a zip file with the VSIX I modified so it can be use with VS2019. Please read the ReadMe.txt file and follow the instructions and it should work for you.

Please let me know how it goes.

RE: 2021 New computer and need to install v1

Andrew Harper — Mon, 02 Aug 2021 02:01:02 GMT

Update:

I successfully downloaded and installed Edhy's installer and Strataframe v1.7.7.1 options now show on my Windows10 20H2 (OS Build 19042.1110) start menu.
As the 2017 VSIX will not install with VS2019 I downloaded and installed VS 2017 Community Edition and installed that successfully.
I rebooted the computer.
I then double clicked on the 2017 VSIX "MicroFour StrataFrame Package.vsix"
The installer runs and then stops as per screenshot below

Any thoughts or suggestions appreciated.

TIA, Andy

RE: 2021 New computer and need to install v1

Andrew Harper — Sun, 01 Aug 2021 22:40:25 GMT

+x[quote]

[b]Edhy Rijo - 7/30/2021[/b]
+x[quote]

[b]Andrew Harper - 7/30/2021[/b]
Hi All,

I am hoping that someone can provide detailed instructions for installing v1 on a Windows 10 computer running VS2019. I have the original install files and if I recall correctly there was a custom VSIX and some customised routines developed by Edhy. The link to these no longer works.

Trust everyone is well and I look forward to hearing about the V2 developments.

TIA,

Andy
[/quote]

Hi Andrew,
The link in the original post http://forum.strataframe.net/FindPost33478.aspx is fixed now.
[/quote]

Thanks Edhy - very much appreciated.

Do you know if there is a VSIX file for Strataframe V1 with Visual Studio 2019?
I tried running the 2017 VSIX file located here http://forum.strataframe.net/Topic33467.aspx but it does not work.

Best regards,

Andy

RE: 2021 New computer and need to install v1

Edhy Rijo — Fri, 30 Jul 2021 07:02:20 GMT

+x[quote]

[b]Andrew Harper - 7/30/2021[/b]
Hi All,

I am hoping that someone can provide detailed instructions for installing v1 on a Windows 10 computer running VS2019. I have the original install files and if I recall correctly there was a custom VSIX and some customised routines developed by Edhy. The link to these no longer works.

Trust everyone is well and I look forward to hearing about the V2 developments.

TIA,

Andy
[/quote]

Hi Andrew,
The link in the original post http://forum.strataframe.net/FindPost33478.aspx is fixed now.

RE: 2021 New computer and need to install v1

Edhy Rijo — Fri, 30 Jul 2021 06:48:33 GMT

+x[quote]

[b]Andrew Harper - 7/30/2021[/b]
Hi All,

I am hoping that someone can provide detailed instructions for installing v1 on a Windows 10 computer running VS2019. I have the original install files and if I recall correctly there was a custom VSIX and some customised routines developed by Edhy. The link to these no longer works.

Trust everyone is well and I look forward to hearing about the V2 developments.

TIA,

Andy
[/quote]

Hi Andrew,
Ivan Borges, just ping me via skype to let me know about this message.
I will look at the original message and fix the link or re-upload the VSIX this morning