You are welcome Thomas!!!

Edhy Rijo

Hi Edhy,

thanks a lot, that saved my evening.

Best regards

Thomas

Hi Thomas,

Nope, there will be no problems, of course you will need to make sure your customer's computer have .Net 4.0.  I use .Net 4 for all my projects so you should be OK.

Edhy Rijo

Hi Edhy,

thanks for your help. I forgot the most important part of the question, which is,

if changing the framework-version (I want all projects within my project map to use

net 4.0), will have any effects on strataframe?

Best regards

Thomas

Hi Thomas,

Do the following:

1. Open your project properties.
2. Click the Compile link
3. At the bottom, click the "Advance Compile Options..."
4. In the "Target framework" select the one you want to use.

Also be aware that if you use any specific x86 driver, that you must set the "Target CPU" to x86 instead of AnyCPU to avoid all kind of errors.

Good luck!!!

Edhy Rijo

Hi there,

when I create a VS2010-Project without strataframe and select NET-Framework

Version 4 and later have a look at the project-properties I can see that the dlls of

Version 4 of the Net-Framework are referenced.

When I create a strataframe-project and select Net 4, I can see that Net-Version 2 is

referenced in the project properties.

How can I change this to Version 4?

Bets regards

Thomas