|
Edhy Rijo
|
|
|
Group: StrataFrame Users
Posts: 2.4K,
Visits: 23K
|
+x+x+x+x+x+x+x+x+xJust bumping this message in the hope someone can help with missing pre-requisites. Tia, Andy Hi Andrew, Sorry for the delay getting back to you. I am trying to upload my full custom setup which may have the prerequisites you may be missing. Please try my setup first and then try installing the extension. I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip Hi Edhy, Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip. When I run the exe I get the following display  I suspect that this may be an older version of your installer. Best regards, Andy Hi Andrew, Please try this one: http://www.progytech.com/downloads/StrataFrameSetup_v1.7.7.1.zip Thanks Edhy - your installer completed successfully. I then double clicked on the VSIX file and got the same message as previously about missing prerequisites. Is there a step I am missing between running your installer and clicking in the VSIX? Do I need to activate Strataframe on the new computer prior to running the VSIX? TIA, Andy Andrew, I believe you are missing the MS SQL SMO libraries used by the DDT. Go to this link: https://www.microsoft.com/en-us/download/details.aspx?id=54279Then look and download the following files: ENU\x64\SharedManagementObjects.msi ENU\x86\SharedManagementObjects.msi ENU\x64\SQLSysClrTypes.msi ENU\x86\SQLSysClrTypes.msi You may only need to install the x64 versions first then try to run the VSIX. Hi Edhy, 1. I downloaded and installed the X64 versions and then reran the VSIX - same result, missing prerequisites. 2. I downloaded and installed the X86 versions and then reran the VSIX - same result, missing prerequisites. 3. I re-read forum message Topic33467 and installed the Addins and Extensibility DLLs into the GAC by running the 2019 Visual Studio command prompt as an administrator. Both DLLs were successfully added to the cache. 4. I reran the VSIX - same result, missing prerequisites. Andy Hi Andrew, I believe you don't have my latest VSIX file. Please download it from this link below, unzip it and follow the instructions in the ReadMe.txt file but use the Developer Command Prompt for VS 2019 instead.. http://www.progytech.com/downloads/SFv1_MicroFour_StrataFrame_Package_%206-20-2018.zip THANKS EDHY ! ! ! The download from the link you provided installed both VS2017 and VS2019. Haven't been able to test thoroughly as yet but looking good so far. Your help is much appreciated, Andy Hi Andy, Wow, I am super happy that this one worked for you. There must have been an issue with the first VSIX you got. Since the forum was migrated I kind of lost track of what I've posted.
Edhy Rijo
|
|
|
|
|
Andrew Harper
|
|
|
Group: StrataFrame Users
Posts: 87,
Visits: 3.3K
|
+x+x+x+x+x+x+x+xJust bumping this message in the hope someone can help with missing pre-requisites. Tia, Andy Hi Andrew, Sorry for the delay getting back to you. I am trying to upload my full custom setup which may have the prerequisites you may be missing. Please try my setup first and then try installing the extension. I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip Hi Edhy, Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip. When I run the exe I get the following display I suspect that this may be an older version of your installer. Best regards, Andy Hi Andrew, Please try this one: http://www.progytech.com/downloads/StrataFrameSetup_v1.7.7.1.zip Thanks Edhy - your installer completed successfully. I then double clicked on the VSIX file and got the same message as previously about missing prerequisites. Is there a step I am missing between running your installer and clicking in the VSIX? Do I need to activate Strataframe on the new computer prior to running the VSIX? TIA, Andy Andrew, I believe you are missing the MS SQL SMO libraries used by the DDT. Go to this link: https://www.microsoft.com/en-us/download/details.aspx?id=54279Then look and download the following files: ENU\x64\SharedManagementObjects.msi ENU\x86\SharedManagementObjects.msi ENU\x64\SQLSysClrTypes.msi ENU\x86\SQLSysClrTypes.msi You may only need to install the x64 versions first then try to run the VSIX. Hi Edhy, 1. I downloaded and installed the X64 versions and then reran the VSIX - same result, missing prerequisites. 2. I downloaded and installed the X86 versions and then reran the VSIX - same result, missing prerequisites. 3. I re-read forum message Topic33467 and installed the Addins and Extensibility DLLs into the GAC by running the 2019 Visual Studio command prompt as an administrator. Both DLLs were successfully added to the cache. 4. I reran the VSIX - same result, missing prerequisites. Andy Hi Andrew, I believe you don't have my latest VSIX file. Please download it from this link below, unzip it and follow the instructions in the ReadMe.txt file but use the Developer Command Prompt for VS 2019 instead.. http://www.progytech.com/downloads/SFv1_MicroFour_StrataFrame_Package_%206-20-2018.zip THANKS EDHY ! ! ! The download from the link you provided installed both VS2017 and VS2019. Haven't been able to test thoroughly as yet but looking good so far. Your help is much appreciated, Andy
|
|
|
|
|
Edhy Rijo
|
|
|
Group: StrataFrame Users
Posts: 2.4K,
Visits: 23K
|
+x+x+x+x+x+x+xJust bumping this message in the hope someone can help with missing pre-requisites. Tia, Andy Hi Andrew, Sorry for the delay getting back to you. I am trying to upload my full custom setup which may have the prerequisites you may be missing. Please try my setup first and then try installing the extension. I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip Hi Edhy, Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip. When I run the exe I get the following display I suspect that this may be an older version of your installer. Best regards, Andy Hi Andrew, Please try this one: http://www.progytech.com/downloads/StrataFrameSetup_v1.7.7.1.zip Thanks Edhy - your installer completed successfully. I then double clicked on the VSIX file and got the same message as previously about missing prerequisites. Is there a step I am missing between running your installer and clicking in the VSIX? Do I need to activate Strataframe on the new computer prior to running the VSIX? TIA, Andy Andrew, I believe you are missing the MS SQL SMO libraries used by the DDT. Go to this link: https://www.microsoft.com/en-us/download/details.aspx?id=54279Then look and download the following files: ENU\x64\SharedManagementObjects.msi ENU\x86\SharedManagementObjects.msi ENU\x64\SQLSysClrTypes.msi ENU\x86\SQLSysClrTypes.msi You may only need to install the x64 versions first then try to run the VSIX. Hi Edhy, 1. I downloaded and installed the X64 versions and then reran the VSIX - same result, missing prerequisites. 2. I downloaded and installed the X86 versions and then reran the VSIX - same result, missing prerequisites. 3. I re-read forum message Topic33467 and installed the Addins and Extensibility DLLs into the GAC by running the 2019 Visual Studio command prompt as an administrator. Both DLLs were successfully added to the cache. 4. I reran the VSIX - same result, missing prerequisites. Andy Hi Andrew, I believe you don't have my latest VSIX file. Please download it from this link below, unzip it and follow the instructions in the ReadMe.txt file but use the Developer Command Prompt for VS 2019 instead.. http://www.progytech.com/downloads/SFv1_MicroFour_StrataFrame_Package_%206-20-2018.zip
Edhy Rijo
|
|
|
|
|
Andrew Harper
|
|
|
Group: StrataFrame Users
Posts: 87,
Visits: 3.3K
|
+x+x+x+x+x+xJust bumping this message in the hope someone can help with missing pre-requisites. Tia, Andy Hi Andrew, Sorry for the delay getting back to you. I am trying to upload my full custom setup which may have the prerequisites you may be missing. Please try my setup first and then try installing the extension. I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip Hi Edhy, Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip. When I run the exe I get the following display I suspect that this may be an older version of your installer. Best regards, Andy Hi Andrew, Please try this one: http://www.progytech.com/downloads/StrataFrameSetup_v1.7.7.1.zip Thanks Edhy - your installer completed successfully. I then double clicked on the VSIX file and got the same message as previously about missing prerequisites. Is there a step I am missing between running your installer and clicking in the VSIX? Do I need to activate Strataframe on the new computer prior to running the VSIX? TIA, Andy Andrew, I believe you are missing the MS SQL SMO libraries used by the DDT. Go to this link: https://www.microsoft.com/en-us/download/details.aspx?id=54279Then look and download the following files: ENU\x64\SharedManagementObjects.msi ENU\x86\SharedManagementObjects.msi ENU\x64\SQLSysClrTypes.msi ENU\x86\SQLSysClrTypes.msi You may only need to install the x64 versions first then try to run the VSIX. Hi Edhy, 1. I downloaded and installed the X64 versions and then reran the VSIX - same result, missing prerequisites. 2. I downloaded and installed the X86 versions and then reran the VSIX - same result, missing prerequisites. 3. I re-read forum message Topic33467 and installed the Addins and Extensibility DLLs into the GAC by running the 2019 Visual Studio command prompt as an administrator. Both DLLs were successfully added to the cache. 4. I reran the VSIX - same result, missing prerequisites. Andy
|
|
|
|
|
Edhy Rijo
|
|
|
Group: StrataFrame Users
Posts: 2.4K,
Visits: 23K
|
+x+x+x+x+xJust bumping this message in the hope someone can help with missing pre-requisites. Tia, Andy Hi Andrew, Sorry for the delay getting back to you. I am trying to upload my full custom setup which may have the prerequisites you may be missing. Please try my setup first and then try installing the extension. I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip Hi Edhy, Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip. When I run the exe I get the following display I suspect that this may be an older version of your installer. Best regards, Andy Hi Andrew, Please try this one: http://www.progytech.com/downloads/StrataFrameSetup_v1.7.7.1.zip Thanks Edhy - your installer completed successfully. I then double clicked on the VSIX file and got the same message as previously about missing prerequisites. Is there a step I am missing between running your installer and clicking in the VSIX? Do I need to activate Strataframe on the new computer prior to running the VSIX? TIA, Andy Andrew, I believe you are missing the MS SQL SMO libraries used by the DDT. Go to this link: https://www.microsoft.com/en-us/download/details.aspx?id=54279Then look and download the following files: ENU\x64\SharedManagementObjects.msi ENU\x86\SharedManagementObjects.msi ENU\x64\SQLSysClrTypes.msi ENU\x86\SQLSysClrTypes.msi You may only need to install the x64 versions first then try to run the VSIX.
Edhy Rijo
|
|
|
|
|
Andrew Harper
|
|
|
Group: StrataFrame Users
Posts: 87,
Visits: 3.3K
|
+x+x+x+xJust bumping this message in the hope someone can help with missing pre-requisites. Tia, Andy Hi Andrew, Sorry for the delay getting back to you. I am trying to upload my full custom setup which may have the prerequisites you may be missing. Please try my setup first and then try installing the extension. I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip Hi Edhy, Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip. When I run the exe I get the following display I suspect that this may be an older version of your installer. Best regards, Andy Hi Andrew, Please try this one: http://www.progytech.com/downloads/StrataFrameSetup_v1.7.7.1.zip Thanks Edhy - your installer completed successfully. I then double clicked on the VSIX file and got the same message as previously about missing prerequisites. Is there a step I am missing between running your installer and clicking in the VSIX? Do I need to activate Strataframe on the new computer prior to running the VSIX? TIA, Andy
|
|
|
|
|
Edhy Rijo
|
|
|
Group: StrataFrame Users
Posts: 2.4K,
Visits: 23K
|
+x+x+xJust bumping this message in the hope someone can help with missing pre-requisites. Tia, Andy Hi Andrew, Sorry for the delay getting back to you. I am trying to upload my full custom setup which may have the prerequisites you may be missing. Please try my setup first and then try installing the extension. I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip Hi Edhy, Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip. When I run the exe I get the following display I suspect that this may be an older version of your installer. Best regards, Andy Hi Andrew, Please try this one: http://www.progytech.com/downloads/StrataFrameSetup_v1.7.7.1.zip
Edhy Rijo
|
|
|
|
|
Andrew Harper
|
|
|
Group: StrataFrame Users
Posts: 87,
Visits: 3.3K
|
+x+xJust bumping this message in the hope someone can help with missing pre-requisites. Tia, Andy Hi Andrew, Sorry for the delay getting back to you. I am trying to upload my full custom setup which may have the prerequisites you may be missing. Please try my setup first and then try installing the extension. I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip Hi Edhy, Thanks for the response. I downloaded the file from the link you posted and extracted the exe from the zip. When I run the exe I get the following display I suspect that this may be an older version of your installer. Best regards, Andy
|
|
|
|
|
Edhy Rijo
|
|
|
Group: StrataFrame Users
Posts: 2.4K,
Visits: 23K
|
+xJust bumping this message in the hope someone can help with missing pre-requisites. Tia, Andy Hi Andrew, Sorry for the delay getting back to you. I am trying to upload my full custom setup which may have the prerequisites you may be missing. Please try my setup first and then try installing the extension. I couldn't upload the file, please try this link: http://www.progytech.com/downloads/StrataFrame_v1.7.7.1.zip
Edhy Rijo
|
|
|
|
|
Andrew Harper
|
|
|
Group: StrataFrame Users
Posts: 87,
Visits: 3.3K
|
Just bumping this message in the hope someone can help with missing pre-requisites.
Tia, Andy
|
|
|
|